Caring for Your Piece of George’s Furniture

Caring for Your Piece of George’s Furniture

Caring for your piece of George’s Furniture is not like caring for just any piece of furniture. The finish used on each of our pieces is a durable, high-quality finish—and it is the best we have found for the following reasons:

no water marks durable finish dining room table furniture store in lancaster

       NO MORE WATER MARKS

High Quality, Catalyzed Water-Resistant Finish

  • The finish is both heat and water-resistant
  • You do not need to use coasters for hot and cold drinks.
  • Warm dishes will not make white rings on the table (however, when taking items directly from the oven, stovetop, or microwave, a hot pad is suggested)
  • A good rule is:

    If it is not too hot for your fingers, it will not harm the table.

Weekly Care

  • Furniture can be washed with a damp cloth.
  • Duster spray may be used (however, sprays that contain wax may cause an undesirable build-up over a period of time)

Occasional Care

  • Polishing or to remove fingerprints, use a good grade furniture polish. Our favorite is Old English Lemon Oil, but Guardsman is also a good choice!

Note Worthy

  • The finish will have a chemical reaction if it comes in contact with rubber cement, airplane glue, or similar products.
  • Permanent magic markers and cigarette burns cause permanent damage to the finish.  
  • The finish will scratch and the wood will dent, so be careful not to slide heavy objects across the table, counters, dressers, etc. A staple or even a hard crumb could cause a surface scratch or indentation.
  • This is solid wood furniture, and it can be refinished.

Damage Repair

trestle table furniture store in york lancaster

         Made in 1983. Refinished like new.

If the damage is a deep scratch or dent and the finish is broken, the damage can be minimized.

  • First, soak the dent with a water saturated washcloth for several hours.
  • Then, while protecting it with a damp washcloth, apply a steam iron to the dent and process will help swell the dent out to the original level.
  • Please call us for advice on this process.

Restore to New

Having been in business more than 50+ years, we have families who bought a table when their children were small.  Then, when their family grew up or the table passed to the next generation, they brought the table back to us and we refinished the tabletop to look as good as new.

If you have any questions, please call us! Our furniture is built to endure the test of time. A great heirloom to be shared over the generations.

Furniture That is Built to Last

Furniture That is Built to Last

We often get asked what makes our furniture last so long. Many of our customers own George’s Furniture heirlooms that have been passed down to them—or they themselves plan on passing their pieces down to their children and other family members.

There are several reasons as to why our high-quality, hand crafted furniture is built to last right here in Lancaster County.

Built from strong solid hardwood

Wood is a resource that keeps on giving. Pennsylvania forests are managed and cared for to strengthen and increase sustainability and the quality of our products.

Constructed with the ability to adjust to moisture changesTongue and groove backing allows for moisture adjustments of solid wood furniture store lancaster york

Between seasons and different climates. When the furniture is sitting in your home, the wood continues to move as the seasons change or the pieces move with you to different climates—but you’d never know it. Our furniture is assembled to allow for this movement without affecting its construction.

Crafted by one craftsman with precision and seasoned skill

We do not have assembly lines. The craftsman who makes your furniture onsite will sign and date every masterpiece. Each craftsman takes pride in the personal work that goes into each piece they build—from start to finish. This goes a long way in controlling the overall quality and beauty in your own piece of furniture.

Quality control at multiple points throughout the building processeach custom furniture is signed by craftsman who made it from start to finish craftsman's signature constructed in lancaster county furniture store

The initial build of your furniture is by one the craftsman. While being hand stained, each surface of the furniture is checked closely. Final assembly includes hardware and possible lighting. We personally deliver our furniture; this allows us to check it while blanket wrapping it for delivery with one final check at your home while you’re present.

Time tested joinery methods

Our gift to you through our joinery methods is a promise for long-lasting construction. Craftsmen are trained to know the “feel” of a solid joint during assembly.

Durability and life of furniture is taken into account at the design stage before building starts

Each piece is reviewed together by both a designer and a craftsman—and continues throughout the building stage. Our designers enjoy working with you to create your own unique piece for your home.

Maintained temperature and humidity in the wood shop and finishing room 

Temperature and humidity levels are monitored throughout the year to keep the wood in a constant stable condition from the building stage, and through to the finishing stage. The wood or furniture never leaves the building between building and finishing. We use humidity control in the building throughout the year.

High grade sanding materialsWalnut natural blend mission hall table amish furniture lancaster

We use the highest grade of sanding materials to give the perfect surface for receiving a consistent stain. Sanding materials are never overused and our craftsmen have the experience to know when enough sanding is enough.

 

As you can see, a lot of time and care goes into each piece of custom furniture is made here at George’s Furniture. Contact us today or stop by our beautiful Lancaster furniture store showroom!

The Choice is Yours: Types of Wood at George’s Furniture

The Choice is Yours: Types of Wood at George’s Furniture

One of the major characteristics of George’s Furniture pieces is the natural beauty of the hardwood we choose for each piece. Our wood is harvested from native trees at just the right time each year. From slow-drying in our kiln, to constructing each piece by hand by our experienced craftsmen to your exact specifications. Throughout this meticulous assembly, precise hand sanding ensures proper fit and finish.

One way in which our customers customize their handmade pieces is by choosing the type of wood they’d like to use to match the look and feel of their home. While we have a beautiful variety of woods to choose from, the most popular choices are our natural black walnut blend, black walnut, cherry, and red oak.

The natural black walnut blend is natural walnut using both the dark inner wood with the lighter outer wood section revealing a beautiful color combination. The center part of the tree (heartwood) is dark brown in color, while the ten (10) outer layers of sapwood are a light off-white color. Our craftsmen choose the boards that have both the sapwood and heartwood grain of the walnut tree. As we carefully arrange the boards to create a unique natural flow of grain, the beauty of this particular wood just shines.

Our black walnut is air dried. Air drying is less stressful on the wood itself, keeping the natural beauty of color variation. This particular wood choice is usually finished with clear water-resistant finish, to let its natural beauty exposed without staining. Black walnut has a flowing, feathery grain.

Cherry wood is naturally lighter red in color with a beautiful flowing grain. We typically stain this gorgeous choice of wood, and our customers have approximately 15 different stains to choose from—from light red to dark red, and everything in between. This rich looking result is very popular among George’s Furniture customers.

Finally, red oak has a distinct, bold grain. Again, while it’s naturally light golden in color, our customers are able to choose from about 15 different stains for this hardwood choice. The stain highlights the darker part of the grain. Also important to note is that red oak is 15% heavier.

Stop into George’s Furniture today to customize your dream furniture! You can even schedule a tour of our woodshop.